Ifconfig-set-mac-address

How to view your computer's MAC address using 'ifconfig

Unix.stackexchange.comDec 06, 2016 · First, your computer doesn't have a MAC address. Your network card has a MAC address. So if you have a wireless card and an Ethernet card, you'll have two MAC addresses. On Linux, either of these commands will show you the MACs of all network cards in your machine: ifconfig | grep ether ip link ifconfig is deprecated on Linux, so you should use ip.

https://unix.stackexchange.com/questions/328693/how-to-view-your-computers-mac-address-using-ifconfig 

Linux ifconfig Command | Linuxize

Linuxize.comJun 28, 2021 · For example, set the MTU value of a network interface eth0 to 500, run the following command:. ifconfig eth0 mtu 500 Change the MAC address of a Network Interface #. The MAC “Media Access Control” is the physical address that uniquely identifies the devices on a …

https://linuxize.com/post/ifconfig-command/ 

Ubuntu: How to change MAC address with ifconfig?

Linuxquestions.orgJun 06, 2008 · At least for Ubuntu, I've read that you can temporarily change the MAC address of your wireless NIC with something like: Code: sudo ifconfig wlan0 down sudo ifconfig wlan0 hw ether 00:28:C7:0A:42:A2 sudo ifconfig wlan0 up. Unfortunately this doesn't seem to work for me. After doing the "sudo ifconfig wlan0 hw ether 00:28:C7:0A:42:A2", if I then

https://www.linuxquestions.org/questions/linux-networking-3/ubuntu-how-to-change-mac-address-with-ifconfig-647323/ 

How to get MAC address from ifconfig - Ask Ubuntu

Askubuntu.comMay 29, 2017 · How can I get MAC address on my notebook? I know I must input ifconfig, but I don't see the line "HWaddr".This is my output: $ sudo ifconfig enp3s0: flags=4099 mtu 1500 ether 28:d2:44:e8:30:6a txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets …

https://askubuntu.com/questions/919901/how-to-get-mac-address-from-ifconfig 

How to change the MAC address of an Ethernet interface

Sleeplessbeastie.euJan 11, 2013 · Change the MAC address of an Ethernet interface and make this change permanent. I will briefly explain how to do this using standard commands and one particularly useful tool MAC Changer. Change the MAC address of an Ethernet interface temporarily Check MAC addresses. $ ifconfig -a | awk '/HWaddr/ {print "Interface: " $1 "\t MAC:…

https://sleeplessbeastie.eu/2013/01/11/how-to-change-the-mac-address-of-an-ethernet-interface/ 

How Change Mac on VxWorks

Groups.google.comJun 10, 2011 · If you want to change mac address of huawei or any other kind of device, there is a better way of command line, first go to web and save the config file, open it with notepad ++ ( I open it with vim in linux) and search for clone you will find the enable/disable of mac address cloning with 0/1 and change the mac address you want to clone. if you can not find it send me …

https://groups.google.com/g/wimax-hacking/c/LndPR-KyQjg 

Set MAC address at boot | The FreeBSD Forums

Forums.freebsd.orgMay 21, 2012 · Well, we swapped a lower spec machine out and swapped IP address to avoid reconfiguration. After which port 80 stopped working. It was fine on the old box. (Both FreeBSD 8.2 set up by me this year). We don't own the router so someone suggested it would possibly be the MAC address IP combination, so I thought what the heck try it.

https://forums.freebsd.org/threads/set-mac-address-at-boot.32089/